|At a glance|
|Product||NETGEAR WNDR4700 CENTRIA [Website]|
|Summary||Storage-centric Atheros-based "N900" abgn router with user-installable 3.5" internal drive, dual USB 3.0 ports and SD card slot.|
|Pros||• Supports WDS and AP modes|
• Dual USB 3.0 ports
• SD card slot
• User-installable SATA drive
|Cons||• Uneven wireless performance|
• No network activity indicators
• Much slower storage writes than reads
• Native internal drive format slower than NTFS
Typical Price: $160 Compare Prices Check Amazon
Updated 4/23/2013: Product is now Wi-Fi Certified
Part 1 of this review provided a feature and function overview, look at the internal details and analysis of the Centria's routing and storage performance. We conclude our coverage of NETGEAR's latest top-of-line N router with a look at its wireless performance and a bit of stress testing.
First an update on noise. I've noticed that the router's blower has gotten more noticeable over the week that the Centria has been powered on. I can now clearly hear it in my quiet home office, over the sound of the other quiet fans in my home office. (Note that the Centria is sitting on a desk and my desktop machine is on a low equipment rack about four inches off the floor.) And this is without a hard drive installed.
This noise probably won't bother you if the router is sitting in a family room or den. But if it's in a bedroom, it could be annoying.
It's odd that the WNDR4700 is not Wi-Fi Certified, since it is not a draft 11AC router and NETGEAR usually certifies all of its wireless routers. The WNDR4700 was Wi-Fi Certified in March 2013.
Table 1 summarizes the Centria's key wireless settings. Note that both Personal and Enterprise (RADIUS) forms of WPA/WPA2 security are supported and channel 165 is not supported on the 5 GHz radio.
|Setting||2.4 GHz||5 GHz|
1 - 11
|36, 40, 44, 48
149, 153, 157, 161
|Mode||Up to 54 Mbps
Up to 195 Mbps (default)
Up to 450 Mbps
|Up to 54 Mbps
Up to 195 Mbps
Up to 450 Mbps (default)
|Bandwidth control||Set by Mode||Set by Mode|
WEP (Up to 54 Mbps mode only)
WPA-PSK [TKIP] + WPA2-PSK [AES]
Table 1: Wireless settings summary
The main settings page shown below contains channel, mode and security settings. Wireless isolation (client-to-client access blocked) can also be enabled on each radio and there is an Enable Video Network option on the 5 GHz radio only. NETGEAR recommends checking this box if you are streaming HD video so that they can kick in "reliability algorithms to reduce jitter and packet loss during video presentations". I did not test this feature. Transmit power on both radios can be stepped down in 25% increments on the Advanced Setup > Wireless Settings screen.
NETGEAR Centria Wireless Settings
I've highlighted the Enable 20/40 MHz Coexistence control, which is enabled by default, on the Advanced settings page shown below. As noted below, the router properly implements both Coexistence and Fat Channel Intolerant behavior. But by unchecking this box, the Centria will ignore both rules and stay in 40 MHz mode in 2.4 GHz if you set the Mode to Up to 450 Mbps.
The 802.11 spec and Wi-Fi Certification requires that both 20/40 MHz Coexistence and Fat Channel Intolerant mechanisms be implemented in 2.4 GHz. So if you uncheck this box, your router will be in violation of the spec.
NETGEAR Centria Advanced Wireless Settings
Continuing on with wireless features, there is one guest network that can be enabled on each radio. The creenshot below shows that each network has its own wireless security and isolation controls. By default, guest network clients get only internet access. But by checking the Allow guest to access My Local Network box, you allow full access to your LAN's wired and wireless clients.
NETGEAR Centria Advanced Wireless Settings
Related Items:Slideshow: Netgear WNDR3300 RangeMax Dual-Band Wireless N Router
Slideshow: D-Link DIR-628 RangeBooster N Dual Band Router
WD My Net N900 5 GHz Retest
Cisco Linksys EA6500 Review - Part 2
Linksys EA6500 Wireless Retest
Average user rating from: 1 user(s)
NOTE! Please post product reviews from actual experience only.
Questions, review comments and opinions about products not based on actual use will not be published.
|User Rating [Back to Top]||Overall:||4.7||Features :||4.0||Performance :||5.0||Reliability :||5.0|
FW need some owerhaul
April 24, 2013
Report this review
Just bought and installed the WNDR4700 and now it is on the ...50 Firmware.
Amazing file performance on the build in and USB 3.0 drives if you format drives on PC with NTFS and big block SIze (mind the avg.size of your files so not to waiste too much Space on drives)
Wireless 2.4 GHz performance better than WNDR3700V2 (that the WNDR4700 replaced)) in my congested enviroment (200+ AP´s visible in inSSIDer) also on Apple/Android devices, NICE.
No way to set which disks/folders will be indexed by DNLA medieserver function (it will even start indexing on apreviusly connected drive if you insert a empty drive like a usb stick or sd Card.
(easy fix could be if index function looks for a DONTindex.TXT file in root or folder on drive(s) and act accordingly)
Powersave do not Work on internal SATA or external USB 3.0 drive(s) (You have to find a USB/SATA to Esata controller where you can flash the needed time (like 15 min) before powersave kicks in) to make that Work)
No place to set powersave time for drives.
USB safely remove function do not Work.
You can not use Internet Explorer 10 to access router GUI, so i use Chrome Version 26.0.1410.64 m
All in all a Super Router but requires tech. knowledge (in the drive controller area) from the user to reaaly make it shine.
Have I reported this to Netgear support ?
NOO I am not beeing Paid to (Beta)test Netgear products.
But BIG thx to Smallnetgearbuilder(s) That really have saved much time for me.